10-21-2021, 11:33 PM
Ciao Julian,
ho eseguito la procedura che mi hai consigliato, l'aggiornamento a xserver-xorg-input-synaptics: non ci sono problemi dopo il riavvio nell'utilizzo del touchpad, con riconosciumento dei movimenti, dei tasti sinistro e destro e dello scorrimento sul lato destro. Il modello del touchpad e' ETPS/2 Elantech Touchpad, della HP. Persiste invece il codice di errore segnalato dall'inizio del post, al riavvio del pc. La tastiera funziona comunque correttamente. Ho ricavato il modello del touchpad sia con hardinfo, sia da terminale:
giuseppe@giuseppe-1015pem:~$ cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=4000 0 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=3e000b 0 0 0 0 0 0 0
I: Bus=0003 Vendor=093a Product=2510 Version=0111
N: Name="PixArt USB Optical Mouse"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:093A:2510.0001/input/input8
U: Uniq=
H: Handlers=mouse0 event6
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0011 Vendor=0002 Product=000e Version=0000
N: Name="ETPS/2 Elantech Touchpad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=mouse1 event7
B: PROP=9
B: EV=b
B: KEY=e420 0 30000 0 0 0 0 0 0 0 0
B: ABS=2608000 11000003
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input9
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=13d3 Product=5702 Version=0322
N: Name="USB2.0 UVC VGA WebCam: USB2.0 U"
P: Phys=usb-0000:00:1d.7-6/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0/input/input12
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0 0 0 0
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="BRLTTY 5.6 Linux Screen Driver Keyboard"
P: Phys=pid-7148/brltty/11
S: Sysfs=/devices/virtual/input/input13
U: Uniq=
H: Handlers=sysrq kbd event12
B: PROP=0
B: EV=100003
B: KEY=4 2000007 ffc03078 f800d2a9 f2beffdf ffefffff ffffffff fffffffe
La versione del kernel e' la 4.19.0-18-686. In github mi sembra parlino della versione 5.4, nel caso dovrei utilizzare la procedura indicata per kernel diversi, se dovessimo procedere con l'asus wmi driver?
Un saluto
Giuseppe
ho eseguito la procedura che mi hai consigliato, l'aggiornamento a xserver-xorg-input-synaptics: non ci sono problemi dopo il riavvio nell'utilizzo del touchpad, con riconosciumento dei movimenti, dei tasti sinistro e destro e dello scorrimento sul lato destro. Il modello del touchpad e' ETPS/2 Elantech Touchpad, della HP. Persiste invece il codice di errore segnalato dall'inizio del post, al riavvio del pc. La tastiera funziona comunque correttamente. Ho ricavato il modello del touchpad sia con hardinfo, sia da terminale:
giuseppe@giuseppe-1015pem:~$ cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0
B: PROP=0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=4000 0 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=3e000b 0 0 0 0 0 0 0
I: Bus=0003 Vendor=093a Product=2510 Version=0111
N: Name="PixArt USB Optical Mouse"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:093A:2510.0001/input/input8
U: Uniq=
H: Handlers=mouse0 event6
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0011 Vendor=0002 Product=000e Version=0000
N: Name="ETPS/2 Elantech Touchpad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=mouse1 event7
B: PROP=9
B: EV=b
B: KEY=e420 0 30000 0 0 0 0 0 0 0 0
B: ABS=2608000 11000003
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input9
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=13d3 Product=5702 Version=0322
N: Name="USB2.0 UVC VGA WebCam: USB2.0 U"
P: Phys=usb-0000:00:1d.7-6/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0/input/input12
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0 0 0 0
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="BRLTTY 5.6 Linux Screen Driver Keyboard"
P: Phys=pid-7148/brltty/11
S: Sysfs=/devices/virtual/input/input13
U: Uniq=
H: Handlers=sysrq kbd event12
B: PROP=0
B: EV=100003
B: KEY=4 2000007 ffc03078 f800d2a9 f2beffdf ffefffff ffffffff fffffffe
La versione del kernel e' la 4.19.0-18-686. In github mi sembra parlino della versione 5.4, nel caso dovrei utilizzare la procedura indicata per kernel diversi, se dovessimo procedere con l'asus wmi driver?
Un saluto
Giuseppe