12-26-2020, 04:29 PM
Salve a tutti, come da oggetto ho riscontrato problemi di risoluzione video a seguito dell'installazione di Roma 2.0.2 su un vecchio pc equipaggiato con Athlon64_3200 (a seguire posterò i comandi: lspci e dmesg per dettagli aggiuntivi.
La massima risoluzione nelle impostazioni dello schermo è di 1024x768, mentre quella corretta dovrebbe essere 1280x1024.
Questi sono i passaggi e tentavi che ho seguito per cercare di risolvere il problema:
- Aggiornato i repositories (aggiornamento automatico di sistema) con la possibilità di installare anche driver proprietari;
- Installati i seguenti pacchetti tramite "Gestore Pacchetti" nel menu impostazioni:
Attualmente le modifiche non hanno portato a nessun risultato;
roma@roma-pc:~$ lspci
00:00.0 Host bridge: ULi Electronics Inc. M1689 K8 Northbridge [Super K8 Single Chip]
00:01.0 PCI bridge: ULi Electronics Inc. AGP8X Controller
00:02.0 PCI bridge: ULi Electronics Inc. M5249 HTT to PCI Bridge
00:03.0 ISA bridge: ULi Electronics Inc. M1563 HyperTransport South Bridge (rev 70)
00:03.1 Bridge: ULi Electronics Inc. M7101 Power Management Controller [PMU]
00:04.0 Multimedia audio controller: ULi Electronics Inc. M5455 PCI AC-Link Controller Audio Device (rev 20)
00:0d.0 Ethernet controller: ULi Electronics Inc. ULi 1689,1573 integrated ethernet. (rev 40)
00:0e.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c7)
00:0e.1 IDE interface: ULi Electronics Inc. ULi 5289 SATA (rev 10)
00:0f.0 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03)
00:0f.1 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03)
00:0f.2 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03)
00:0f.3 USB controller: ULi Electronics Inc. USB 2.0 Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
dmesg:
[ 0.405034] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405137] system 00:05: [mem 0xffbc0000-0xffbfffff] has been reserved
[ 0.405139] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.405141] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.405148] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405214] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.405487] pnp 00:07: [dma 0 disabled]
[ 0.405559] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.405675] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.405677] system 00:08: [io 0x0295-0x0296] has been reserved
[ 0.405684] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405864] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.405866] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.405868] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.405871] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.405877] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.406064] pnp: PnP ACPI: found 10 devices
[ 0.406067] PnPBIOS: Disabled
[ 0.442843] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.442861] clocksource: Switched to clocksource acpi_pm
[ 0.442889] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.442893] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.442898] pci 0000:00:01.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.442901] pci 0000:00:01.0: bridge window [mem 0xd6b00000-0xf6afffff pref]
[ 0.442906] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.442918] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.442920] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.442922] pci_bus 0000:00: resource 6 [mem 0x80000000-0xffffffff]
[ 0.442924] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.442926] pci_bus 0000:01: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.442927] pci_bus 0000:01: resource 2 [mem 0xd6b00000-0xf6afffff pref]
[ 0.442929] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.442931] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.442933] pci_bus 0000:02: resource 6 [mem 0x80000000-0xffffffff]
[ 0.443043] NET: Registered protocol family 2
[ 0.443297] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.443307] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.443346] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.443413] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.443501] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.443518] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.443584] NET: Registered protocol family 1
[ 0.443591] NET: Registered protocol family 44
[ 0.443641] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.521379] pci 0000:00:0f.0: quirk_usb_early_handoff+0x0/0x6d7 took 77408 usecs
[ 0.601353] pci 0000:00:0f.1: quirk_usb_early_handoff+0x0/0x6d7 took 78089 usecs
[ 0.681352] pci 0000:00:0f.2: quirk_usb_early_handoff+0x0/0x6d7 took 78114 usecs
[ 0.681460] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.681555] Unpacking initramfs...
[ 1.675315] Freeing initrd memory: 35392K
[ 1.676401] Initialise system trusted keyrings
[ 1.676419] Key type blacklist registered
[ 1.676509] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.678647] zbud: loaded
[ 2.649177] Key type asymmetric registered
[ 2.649181] Asymmetric key parser 'x509' registered
[ 2.649203] bounce: pool size: 64 pages
[ 2.649237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.649297] io scheduler noop registered
[ 2.649298] io scheduler deadline registered
[ 2.649446] io scheduler cfq registered (default)
[ 2.649447] io scheduler mq-deadline registered
[ 2.649801] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.650013] isapnp: Scanning for PnP cards...
[ 3.003425] isapnp: No Plug & Play device found
[ 3.003557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.023974] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.024510] Linux agpgart interface v0.103
[ 3.024527] agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689])
[ 3.024620] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
[ 3.024627] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 3.024631] agpgart-amd64 0000:00:00.0: setting up ULi AGP
[ 3.027066] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 3.027355] i8042: PNP: PS/2 Controller [PNP0303
S2K] at 0x60,0x64 irq 1
[ 3.027356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.028183] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.028312] mousedev: PS/2 mouse device common for all mice
[ 3.028365] rtc_cmos 00:00: RTC can wake from S4
[ 3.028484] rtc_cmos 00:00: registered as rtc0
[ 3.028511] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 3.028548] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.028962] NET: Registered protocol family 10
[ 3.042166] Segment Routing with IPv6
[ 3.042205] mip6: Mobile IPv6
[ 3.042208] NET: Registered protocol family 17
[ 3.042256] mpls_gso: MPLS GSO support
[ 3.042389] mce: Using 5 MCE banks
[ 3.042417] Using IPI No-Shortcut mode
[ 3.042596] registered taskstats version 1
[ 3.042597] Loading compiled-in X.509 certificates
[ 3.050588] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.263947] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.263973] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 3.264002] zswap: loaded using pool lzo/zbud
[ 3.264066] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.264392] rtc_cmos 00:00: setting system clock to 2020-12-26 13:40:41 UTC (1608990041)
[ 3.264434] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 3.266472] Freeing unused kernel image memory: 840K
[ 3.277384] Write protecting the kernel text: 6640k
[ 3.277434] Write protecting the kernel read-only data: 2080k
[ 3.277436] Run /init as init process
[ 3.432512] udevd[86]: starting version 3.2.7
[ 3.432880] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.432938] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.435690] udevd[87]: starting eudev-3.2.7
[ 3.476920] ali1535_smbus 0000:00:03.1: enabling device (0000 -> 0001)
[ 3.476928] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 3.476929] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[ 3.483727] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.483744] ACPI: Power Button [PWRB]
[ 3.492519] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.493007] ACPI: Power Button [PWRF]
[ 3.494997] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
[ 3.514710] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 3.514763] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
[ 3.519278] Floppy drive(s): fd0 is 1.44M
[ 3.527552] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 3.555361] FDC 0 is a post-1991 82077
[ 3.596567] ACPI: bus type USB registered
[ 3.596605] usbcore: registered new interface driver usbfs
[ 3.596622] usbcore: registered new interface driver hub
[ 3.617728] usbcore: registered new device driver usb
[ 3.623932] SCSI subsystem initialized
[ 3.652246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.656777] ehci-pci: EHCI PCI platform driver
[ 3.656966] ehci-pci 0000:00:0f.3: EHCI Host Controller
[ 3.656979] ehci-pci 0000:00:0f.3: new USB bus registered, assigned bus number 1
[ 3.656992] ehci-pci 0000:00:0f.3: debug port 1
[ 3.657057] ehci-pci 0000:00:0f.3: irq 23, io mem 0xff6fe800
[ 3.661148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.686985] ehci-pci 0000:00:0f.3: USB 2.0 started, EHCI 1.00
[ 3.687076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.687078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.687080] usb usb1: Product: EHCI Host Controller
[ 3.687081] usb usb1: Manufacturer: Linux 4.19.0-9-686 ehci_hcd
[ 3.687083] usb usb1: SerialNumber: 0000:00:0f.3
[ 3.687290] hub 1-0:1.0: USB hub found
[ 3.687299] hub 1-0:1.0: 8 ports detected
[ 3.691267] ohci-pci: OHCI PCI platform driver
[ 3.691444] ohci-pci 0000:00:0f.0: OHCI PCI host controller
[ 3.691453] ohci-pci 0000:00:0f.0: new USB bus registered, assigned bus number 2
[ 3.691515] ohci-pci 0000:00:0f.0: irq 20, io mem 0xff6fd000
[ 3.714326] libata version 3.00 loaded.
[ 3.719347] sata_uli 0000:00:0e.1: version 1.3
[ 3.726334] scsi host0: sata_uli
[ 3.735044] uli526x 0000:00:0d.0 eth0: ULi M5263 at pci0000:00:0d.0, 00:13:8f:64:2a:2f, irq 17
[ 3.735660] scsi host1: sata_uli
[ 3.735760] ata3: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd880 irq 19
[ 3.735763] ata4: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd888 irq 19
[ 3.736943] scsi host2: pata_ali
[ 3.743526] scsi host3: pata_ali
[ 3.743646] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.743648] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.751470] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.751473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.751475] usb usb2: Product: OHCI PCI host controller
[ 3.751476] usb usb2: Manufacturer: Linux 4.19.0-9-686 ohci_hcd
[ 3.751478] usb usb2: SerialNumber: 0000:00:0f.0
[ 3.751844] hub 2-0:1.0: USB hub found
[ 3.751855] hub 2-0:1.0: 3 ports detected
[ 3.752366] ohci-pci 0000:00:0f.1: OHCI PCI host controller
[ 3.752374] ohci-pci 0000:00:0f.1: new USB bus registered, assigned bus number 3
[ 3.752428] ohci-pci 0000:00:0f.1: irq 21, io mem 0xff6fc000
[ 3.812339] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.812343] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.812345] usb usb3: Product: OHCI PCI host controller
[ 3.812346] usb usb3: Manufacturer: Linux 4.19.0-9-686 ohci_hcd
[ 3.812347] usb usb3: SerialNumber: 0000:00:0f.1
[ 3.813946] hub 3-0:1.0: USB hub found
[ 3.813957] hub 3-0:1.0: 3 ports detected
[ 3.814481] ohci-pci 0000:00:0f.2: OHCI PCI host controller
[ 3.814489] ohci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 4
[ 3.814541] ohci-pci 0000:00:0f.2: irq 22, io mem 0xff6fb000
[ 3.815873] [drm] radeon kernel modesetting enabled.
[ 3.816477] [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x174B:0x0260 0x01).
[ 3.817766] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 3.817777] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 3.817801] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 3.817806] radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[ 3.817809] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.817813] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
[ 3.817823] [drm] Detected VRAM RAM=128M, BAR=128M
[ 3.817824] [drm] RAM width 64bits DDR
[ 3.817928] [TTM] Zone kernel: Available graphics memory: 432458 kiB
[ 3.817929] [TTM] Zone highmem: Available graphics memory: 1032366 kiB
[ 3.817930] [TTM] Initializing pool allocator
[ 3.817964] [drm] radeon: 128M of VRAM memory ready
[ 3.817965] [drm] radeon: 64M of GTT memory ready.
[ 3.818789] radeon 0000:01:00.0: WB disabled
[ 3.818798] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0x(ptrval)
[ 3.818801] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.818802] [drm] Driver supports precise vblank timestamp query.
[ 3.818832] [drm] radeon: irq initialized.
[ 3.818851] [drm] Loading R200 Microcode
[ 3.818890] radeon 0000:01:00.0: firmware: failed to load radeon/R200_cp.bin (-2)
[ 3.818935] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 3.818979] radeon 0000:01:00.0: Direct firmware load for radeon/R200_cp.bin failed with error -2
[ 3.819063] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware!
[ 3.819101] radeon 0000:01:00.0: failed initializing CP (-2).
[ 3.819136] radeon 0000:01:00.0: Disabling GPU acceleration
[ 3.819173] [drm] radeon: cp finalized
[ 3.819222] [drm] radeon: cp finalized
[ 3.819250] [TTM] Finalizing pool allocator
[ 3.819770] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 3.819774] [TTM] Zone highmem: Used memory at exit: 0 kiB
[ 3.819777] [drm] radeon: ttm finalized
[ 3.819780] [drm] Forcing AGP to PCI mode
[ 3.820989] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.820995] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
[ 3.820998] radeon 0000:01:00.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[ 3.821002] [drm] Detected VRAM RAM=128M, BAR=128M
[ 3.821003] [drm] RAM width 64bits DDR
[ 3.821087] [TTM] Zone kernel: Available graphics memory: 432458 kiB
[ 3.821088] [TTM] Zone highmem: Available graphics memory: 1032366 kiB
[ 3.821089] [TTM] Initializing pool allocator
[ 3.821116] [drm] radeon: 128M of VRAM memory ready
[ 3.821117] [drm] radeon: 512M of GTT memory ready.
[ 3.821128] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.823677] [drm] PCI GART of 512M enabled (table at 0x0000000035400000).
[ 3.823729] radeon 0000:01:00.0: WB disabled
[ 3.823735] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0x(ptrval)
[ 3.823739] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.823739] [drm] Driver supports precise vblank timestamp query.
[ 3.823771] [drm] radeon: irq initialized.
[ 3.823774] [drm] Loading R200 Microcode
[ 3.823838] radeon 0000:01:00.0: firmware: failed to load radeon/R200_cp.bin (-2)
[ 3.823885] radeon 0000:01:00.0: Direct firmware load for radeon/R200_cp.bin failed with error -2
[ 3.824084] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware!
[ 3.824123] radeon 0000:01:00.0: failed initializing CP (-2).
[ 3.824158] radeon 0000:01:00.0: Disabling GPU acceleration
[ 3.824195] [drm] radeon: cp finalized
[ 3.825870] [drm] Radeon Display Connectors
[ 3.825872] [drm] Connector 0:
[ 3.825873] [drm] VGA-1
[ 3.825875] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.825876] [drm] Encoders:
[ 3.825877] [drm] CRT1: INTERNAL_DAC1
[ 3.825878] [drm] Connector 1:
[ 3.825878] [drm] DVI-I-1
[ 3.825879] [drm] HPD1
[ 3.825881] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.825881] [drm] Encoders:
[ 3.825882] [drm] CRT2: INTERNAL_DAC2
[ 3.825883] [drm] DFP1: INTERNAL_TMDS1
[ 3.825883] [drm] Connector 2:
[ 3.825884] [drm] SVIDEO-1
[ 3.825884] [drm] Encoders:
[ 3.825885] [drm] TV1: INTERNAL_DAC2
[ 3.864681] [drm] fb mappable at 0xE8040000
[ 3.864682] [drm] vram apper at 0xE8000000
[ 3.864683] [drm] size 3145728
[ 3.864683] [drm] fb depth is 24
[ 3.864684] [drm] pitch is 4096
[ 3.864887] fbcon: radeondrmfb (fb0) is primary device
[ 3.918364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.918367] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.918368] usb usb4: Product: OHCI PCI host controller
[ 3.918370] usb usb4: Manufacturer: Linux 4.19.0-9-686 ohci_hcd
[ 3.918371] usb usb4: SerialNumber: 0000:00:0f.2
[ 3.918722] hub 4-0:1.0: USB hub found
[ 3.918732] hub 4-0:1.0: 3 ports detected
[ 3.944266] Console: switching to colour frame buffer device 128x48
[ 3.965020] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.965090] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 3.967657] ata1.01: ATA-7: MAXTOR STM3160215A, 3.AAD, max UDMA/100
[ 3.967662] ata1.01: 312581808 sectors, multi 16: LBA48
[ 4.313315] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 4.359749] scsi 2:0:1:0: Direct-Access ATA MAXTOR STM316021 D PQ: 0 ANSI: 5
[ 4.519839] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
[ 4.519843] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 4.519845] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 4.526493] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
[ 4.547417] usb 2-1: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00
[ 4.547420] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.547422] usb 2-1: Product: USB Optical Mouse
[ 4.547424] usb 2-1: Manufacturer: Logitech
[ 4.548154] sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.548166] sd 2:0:1:0: [sda] Write Protect is off
[ 4.548168] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.548182] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.559512] hidraw: raw HID events driver © Jiri Kosina
[ 4.570345] usbcore: registered new interface driver usbhid
[ 4.570347] usbhid: USB HID core driver
[ 4.574649] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.0/0003:046D:C05A.0001/input/input3
[ 4.574870] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0f.0-1/input0
[ 4.575115] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.575118] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.575485] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.580406] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 4.580508] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.600865] sda: sda1 sda2
[ 4.601357] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.805322] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 4.962755] random: fast init done
[ 4.963263] usb 1-4: New USB device found, idVendor=2357, idProduct=011e, bcdDevice= 2.00
[ 4.963266] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.963268] usb 1-4: Product: 802.11ac WLAN Adapter
[ 4.963269] usb 1-4: Manufacturer: Realtek
[ 4.963271] usb 1-4: SerialNumber: 00e04c000001
[ 5.745336] raid6: mmxx1 gen() 1656 MB/s
[ 5.813313] raid6: mmxx2 gen() 3028 MB/s
[ 5.881322] raid6: sse1x1 gen() 1409 MB/s
[ 5.949308] raid6: sse1x2 gen() 2096 MB/s
[ 6.017325] raid6: sse2x1 gen() 2174 MB/s
[ 6.085318] raid6: sse2x1 xor() 2234 MB/s
[ 6.153322] raid6: sse2x2 gen() 2786 MB/s
[ 6.221307] raid6: sse2x2 xor() 2423 MB/s
[ 6.289356] raid6: int32x1 gen() 932 MB/s
[ 6.357305] raid6: int32x1 xor() 570 MB/s
[ 6.425359] raid6: int32x2 gen() 909 MB/s
[ 6.493340] raid6: int32x2 xor() 625 MB/s
[ 6.561306] raid6: int32x4 gen() 744 MB/s
[ 6.629307] raid6: int32x4 xor() 543 MB/s
[ 6.697355] raid6: int32x8 gen() 671 MB/s
[ 6.765327] raid6: int32x8 xor() 470 MB/s
[ 6.765328] raid6: using algorithm mmxx2 gen() 3028 MB/s
[ 6.765329] raid6: using intx1 recovery algorithm
[ 6.768125] xor: measuring software checksum speed
[ 6.805306] pIII_sse : 5724.000 MB/sec
[ 6.845305] prefetch64-sse: 6026.000 MB/sec
[ 6.845306] xor: using function: prefetch64-sse (6026.000 MB/sec)
[ 6.847486] async_tx: api initialized (async)
[ 6.892736] random: lvm: uninitialized urandom read (4 bytes read)
[ 6.984914] Btrfs loaded, crc32c=crc32c-generic
[ 19.625715] print_req_error: I/O error, dev fd0, sector 0
[ 19.625938] floppy: error 10 while reading block 0
[ 19.972549] PM: Image not found (code -22)
[ 22.314052] random: crng init done
[ 24.023165] cryptd: max_cpu_qlen set to 1000
[ 24.849424] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 27.345869] udevd[378]: starting version 3.2.7
[ 27.629214] udevd[378]: specified group 'kvm' unknown
[ 27.845057] udevd[378]: starting eudev-3.2.7
[ 28.134195] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[ 28.134207] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
[ 28.479620] parport_pc 00:02: reported by Plug and Play ACPI
[ 28.479722] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 28.567258] gameport gameport0: NS558 PnP Gameport is pnp00:03/gameport0, io 0x200, speed 873kHz
[ 28.892599] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 29.095089] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 29.133829] MCE: In-kernel MCE decoding enabled.
[ 29.656673] EDAC amd64: Node 0: DRAM ECC disabled.
[ 29.656676] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 29.737320] snd_intel8x0 0000:00:04.0: AC'97 1 does not respond - RESET
[ 29.737788] snd_intel8x0 0000:00:04.0: AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 29.738154] snd_intel8x0 0000:00:04.0: Unable to initialize codec #1
[ 29.797367] snd_intel8x0 0000:00:04.0: intel8x0_measure_ac97_clock: measured 58393 usecs (2816 samples)
[ 29.797371] snd_intel8x0 0000:00:04.0: clocking to 48000
[ 30.031559] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 30.031561] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 30.031562] powernow_k8: fid 0x2 (1000 MHz), vid 0xa
[ 30.031597] powernow_k8: Found 1 AMD Athlon™ 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 30.419957] ppdev: user-space parallel port driver
[ 32.738076] 88XXau: loading out-of-tree module taints kernel.
[ 32.745890] 88XXau: module verification failed: signature and/or required key missing - tainting kernel
[ 32.916934] usbcore: registered new interface driver rtl88xxau
[ 32.960067] rtl88xxau 1-4:1.0 wlxd037459be591: renamed from wlan0
[ 34.428757] Adding 4542544k swap on /dev/sda2. Priority:-2 extents:1 across:4542544k FS
[ 34.517282] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 35.053346] device-mapper: uevent: version 1.0.3
[ 35.054485] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 35.235229] lp0: using parport0 (interrupt-driven).
[ 36.683166] audit: type=1400 audit(1608990075.039:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1154 comm="apparmor_parser"
[ 36.690695] audit: type=1400 audit(1608990075.047:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1155 comm="apparmor_parser"
[ 36.778423] audit: type=1400 audit(1608990075.135:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1156 comm="apparmor_parser"
[ 36.778430] audit: type=1400 audit(1608990075.135:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1156 comm="apparmor_parser"
[ 36.778433] audit: type=1400 audit(1608990075.135:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1156 comm="apparmor_parser"
[ 36.844726] audit: type=1400 audit(1608990075.203:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1157 comm="apparmor_parser"
[ 36.871795] audit: type=1400 audit(1608990075.227:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1158 comm="apparmor_parser"
[ 36.930356] audit: type=1400 audit(1608990075.287:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1160 comm="apparmor_parser"
[ 36.930362] audit: type=1400 audit(1608990075.287:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1160 comm="apparmor_parser"
[ 36.930365] audit: type=1400 audit(1608990075.287:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1160 comm="apparmor_parser"
[ 38.515619] RPC: Registered named UNIX socket transport module.
[ 38.515622] RPC: Registered udp transport module.
[ 38.515623] RPC: Registered tcp transport module.
[ 38.515624] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 38.574323] FS-Cache: Loaded
[ 38.656402] FS-Cache: Netfs 'nfs' registered for caching
[ 38.742576] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 39.460930] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 43.422133] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 43.756280] Bluetooth: Core ver 2.22
[ 43.756308] NET: Registered protocol family 31
[ 43.756310] Bluetooth: HCI device and connection manager initialized
[ 43.756654] Bluetooth: HCI socket layer initialized
[ 43.756658] Bluetooth: L2CAP socket layer initialized
[ 43.756667] Bluetooth: SCO socket layer initialized
[ 44.342926] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.342931] Bluetooth: BNEP filters: protocol multicast
[ 44.342940] Bluetooth: BNEP socket layer initialized
[ 45.769779] elogind-daemon[1902]: New seat seat0.
[ 50.969535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 51.004796] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 51.037706] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 51.541160] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 51.548374] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 54.119940] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 54.210195] uli526x 0000:00:0d.0 eth0: NIC Link is Down
[ 58.236285] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 61.899150] NET: Registered protocol family 3
[ 62.260162] NET: Registered protocol family 5
[ 62.674094] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd037459be591: link becomes ready
[ 75.500269] elogind-daemon[1902]: New session 3 of user roma.
Allego anche uno snapshot della schermata di avvio del sistema
Ringrazio anticipatamente lo staff di Ufficio Zero lInux
Stefano
La massima risoluzione nelle impostazioni dello schermo è di 1024x768, mentre quella corretta dovrebbe essere 1280x1024.
Questi sono i passaggi e tentavi che ho seguito per cercare di risolvere il problema:
- Aggiornato i repositories (aggiornamento automatico di sistema) con la possibilità di installare anche driver proprietari;
- Installati i seguenti pacchetti tramite "Gestore Pacchetti" nel menu impostazioni:
- firmware-linux
- firmware-amd-graphics
- firmware-linu-non free
- xserver-xorg-video-ati
- radeontool
- radeotop
Attualmente le modifiche non hanno portato a nessun risultato;
roma@roma-pc:~$ lspci
00:00.0 Host bridge: ULi Electronics Inc. M1689 K8 Northbridge [Super K8 Single Chip]
00:01.0 PCI bridge: ULi Electronics Inc. AGP8X Controller
00:02.0 PCI bridge: ULi Electronics Inc. M5249 HTT to PCI Bridge
00:03.0 ISA bridge: ULi Electronics Inc. M1563 HyperTransport South Bridge (rev 70)
00:03.1 Bridge: ULi Electronics Inc. M7101 Power Management Controller [PMU]
00:04.0 Multimedia audio controller: ULi Electronics Inc. M5455 PCI AC-Link Controller Audio Device (rev 20)
00:0d.0 Ethernet controller: ULi Electronics Inc. ULi 1689,1573 integrated ethernet. (rev 40)
00:0e.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c7)
00:0e.1 IDE interface: ULi Electronics Inc. ULi 5289 SATA (rev 10)
00:0f.0 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03)
00:0f.1 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03)
00:0f.2 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03)
00:0f.3 USB controller: ULi Electronics Inc. USB 2.0 Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
dmesg:
[ 0.405034] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405137] system 00:05: [mem 0xffbc0000-0xffbfffff] has been reserved
[ 0.405139] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.405141] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.405148] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405214] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.405487] pnp 00:07: [dma 0 disabled]
[ 0.405559] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.405675] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.405677] system 00:08: [io 0x0295-0x0296] has been reserved
[ 0.405684] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.405864] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.405866] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.405868] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.405871] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.405877] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.406064] pnp: PnP ACPI: found 10 devices
[ 0.406067] PnPBIOS: Disabled
[ 0.442843] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.442861] clocksource: Switched to clocksource acpi_pm
[ 0.442889] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.442893] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.442898] pci 0000:00:01.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.442901] pci 0000:00:01.0: bridge window [mem 0xd6b00000-0xf6afffff pref]
[ 0.442906] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.442918] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.442920] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.442922] pci_bus 0000:00: resource 6 [mem 0x80000000-0xffffffff]
[ 0.442924] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.442926] pci_bus 0000:01: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.442927] pci_bus 0000:01: resource 2 [mem 0xd6b00000-0xf6afffff pref]
[ 0.442929] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.442931] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.442933] pci_bus 0000:02: resource 6 [mem 0x80000000-0xffffffff]
[ 0.443043] NET: Registered protocol family 2
[ 0.443297] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.443307] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.443346] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.443413] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.443501] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.443518] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.443584] NET: Registered protocol family 1
[ 0.443591] NET: Registered protocol family 44
[ 0.443641] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.521379] pci 0000:00:0f.0: quirk_usb_early_handoff+0x0/0x6d7 took 77408 usecs
[ 0.601353] pci 0000:00:0f.1: quirk_usb_early_handoff+0x0/0x6d7 took 78089 usecs
[ 0.681352] pci 0000:00:0f.2: quirk_usb_early_handoff+0x0/0x6d7 took 78114 usecs
[ 0.681460] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.681555] Unpacking initramfs...
[ 1.675315] Freeing initrd memory: 35392K
[ 1.676401] Initialise system trusted keyrings
[ 1.676419] Key type blacklist registered
[ 1.676509] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.678647] zbud: loaded
[ 2.649177] Key type asymmetric registered
[ 2.649181] Asymmetric key parser 'x509' registered
[ 2.649203] bounce: pool size: 64 pages
[ 2.649237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.649297] io scheduler noop registered
[ 2.649298] io scheduler deadline registered
[ 2.649446] io scheduler cfq registered (default)
[ 2.649447] io scheduler mq-deadline registered
[ 2.649801] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.650013] isapnp: Scanning for PnP cards...
[ 3.003425] isapnp: No Plug & Play device found
[ 3.003557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.023974] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.024510] Linux agpgart interface v0.103
[ 3.024527] agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689])
[ 3.024620] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
[ 3.024627] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 3.024631] agpgart-amd64 0000:00:00.0: setting up ULi AGP
[ 3.027066] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 3.027355] i8042: PNP: PS/2 Controller [PNP0303
S2K] at 0x60,0x64 irq 1[ 3.027356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.028183] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.028312] mousedev: PS/2 mouse device common for all mice
[ 3.028365] rtc_cmos 00:00: RTC can wake from S4
[ 3.028484] rtc_cmos 00:00: registered as rtc0
[ 3.028511] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 3.028548] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.028962] NET: Registered protocol family 10
[ 3.042166] Segment Routing with IPv6
[ 3.042205] mip6: Mobile IPv6
[ 3.042208] NET: Registered protocol family 17
[ 3.042256] mpls_gso: MPLS GSO support
[ 3.042389] mce: Using 5 MCE banks
[ 3.042417] Using IPI No-Shortcut mode
[ 3.042596] registered taskstats version 1
[ 3.042597] Loading compiled-in X.509 certificates
[ 3.050588] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.263947] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.263973] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 3.264002] zswap: loaded using pool lzo/zbud
[ 3.264066] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.264392] rtc_cmos 00:00: setting system clock to 2020-12-26 13:40:41 UTC (1608990041)
[ 3.264434] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 3.266472] Freeing unused kernel image memory: 840K
[ 3.277384] Write protecting the kernel text: 6640k
[ 3.277434] Write protecting the kernel read-only data: 2080k
[ 3.277436] Run /init as init process
[ 3.432512] udevd[86]: starting version 3.2.7
[ 3.432880] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.432938] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.435690] udevd[87]: starting eudev-3.2.7
[ 3.476920] ali1535_smbus 0000:00:03.1: enabling device (0000 -> 0001)
[ 3.476928] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 3.476929] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[ 3.483727] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.483744] ACPI: Power Button [PWRB]
[ 3.492519] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.493007] ACPI: Power Button [PWRF]
[ 3.494997] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
[ 3.514710] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 3.514763] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
[ 3.519278] Floppy drive(s): fd0 is 1.44M
[ 3.527552] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 3.555361] FDC 0 is a post-1991 82077
[ 3.596567] ACPI: bus type USB registered
[ 3.596605] usbcore: registered new interface driver usbfs
[ 3.596622] usbcore: registered new interface driver hub
[ 3.617728] usbcore: registered new device driver usb
[ 3.623932] SCSI subsystem initialized
[ 3.652246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.656777] ehci-pci: EHCI PCI platform driver
[ 3.656966] ehci-pci 0000:00:0f.3: EHCI Host Controller
[ 3.656979] ehci-pci 0000:00:0f.3: new USB bus registered, assigned bus number 1
[ 3.656992] ehci-pci 0000:00:0f.3: debug port 1
[ 3.657057] ehci-pci 0000:00:0f.3: irq 23, io mem 0xff6fe800
[ 3.661148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.686985] ehci-pci 0000:00:0f.3: USB 2.0 started, EHCI 1.00
[ 3.687076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.687078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.687080] usb usb1: Product: EHCI Host Controller
[ 3.687081] usb usb1: Manufacturer: Linux 4.19.0-9-686 ehci_hcd
[ 3.687083] usb usb1: SerialNumber: 0000:00:0f.3
[ 3.687290] hub 1-0:1.0: USB hub found
[ 3.687299] hub 1-0:1.0: 8 ports detected
[ 3.691267] ohci-pci: OHCI PCI platform driver
[ 3.691444] ohci-pci 0000:00:0f.0: OHCI PCI host controller
[ 3.691453] ohci-pci 0000:00:0f.0: new USB bus registered, assigned bus number 2
[ 3.691515] ohci-pci 0000:00:0f.0: irq 20, io mem 0xff6fd000
[ 3.714326] libata version 3.00 loaded.
[ 3.719347] sata_uli 0000:00:0e.1: version 1.3
[ 3.726334] scsi host0: sata_uli
[ 3.735044] uli526x 0000:00:0d.0 eth0: ULi M5263 at pci0000:00:0d.0, 00:13:8f:64:2a:2f, irq 17
[ 3.735660] scsi host1: sata_uli
[ 3.735760] ata3: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd880 irq 19
[ 3.735763] ata4: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd888 irq 19
[ 3.736943] scsi host2: pata_ali
[ 3.743526] scsi host3: pata_ali
[ 3.743646] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.743648] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.751470] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.751473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.751475] usb usb2: Product: OHCI PCI host controller
[ 3.751476] usb usb2: Manufacturer: Linux 4.19.0-9-686 ohci_hcd
[ 3.751478] usb usb2: SerialNumber: 0000:00:0f.0
[ 3.751844] hub 2-0:1.0: USB hub found
[ 3.751855] hub 2-0:1.0: 3 ports detected
[ 3.752366] ohci-pci 0000:00:0f.1: OHCI PCI host controller
[ 3.752374] ohci-pci 0000:00:0f.1: new USB bus registered, assigned bus number 3
[ 3.752428] ohci-pci 0000:00:0f.1: irq 21, io mem 0xff6fc000
[ 3.812339] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.812343] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.812345] usb usb3: Product: OHCI PCI host controller
[ 3.812346] usb usb3: Manufacturer: Linux 4.19.0-9-686 ohci_hcd
[ 3.812347] usb usb3: SerialNumber: 0000:00:0f.1
[ 3.813946] hub 3-0:1.0: USB hub found
[ 3.813957] hub 3-0:1.0: 3 ports detected
[ 3.814481] ohci-pci 0000:00:0f.2: OHCI PCI host controller
[ 3.814489] ohci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 4
[ 3.814541] ohci-pci 0000:00:0f.2: irq 22, io mem 0xff6fb000
[ 3.815873] [drm] radeon kernel modesetting enabled.
[ 3.816477] [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x174B:0x0260 0x01).
[ 3.817766] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 3.817777] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 3.817801] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 3.817806] radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[ 3.817809] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.817813] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
[ 3.817823] [drm] Detected VRAM RAM=128M, BAR=128M
[ 3.817824] [drm] RAM width 64bits DDR
[ 3.817928] [TTM] Zone kernel: Available graphics memory: 432458 kiB
[ 3.817929] [TTM] Zone highmem: Available graphics memory: 1032366 kiB
[ 3.817930] [TTM] Initializing pool allocator
[ 3.817964] [drm] radeon: 128M of VRAM memory ready
[ 3.817965] [drm] radeon: 64M of GTT memory ready.
[ 3.818789] radeon 0000:01:00.0: WB disabled
[ 3.818798] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0x(ptrval)
[ 3.818801] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.818802] [drm] Driver supports precise vblank timestamp query.
[ 3.818832] [drm] radeon: irq initialized.
[ 3.818851] [drm] Loading R200 Microcode
[ 3.818890] radeon 0000:01:00.0: firmware: failed to load radeon/R200_cp.bin (-2)
[ 3.818935] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 3.818979] radeon 0000:01:00.0: Direct firmware load for radeon/R200_cp.bin failed with error -2
[ 3.819063] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware!
[ 3.819101] radeon 0000:01:00.0: failed initializing CP (-2).
[ 3.819136] radeon 0000:01:00.0: Disabling GPU acceleration
[ 3.819173] [drm] radeon: cp finalized
[ 3.819222] [drm] radeon: cp finalized
[ 3.819250] [TTM] Finalizing pool allocator
[ 3.819770] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 3.819774] [TTM] Zone highmem: Used memory at exit: 0 kiB
[ 3.819777] [drm] radeon: ttm finalized
[ 3.819780] [drm] Forcing AGP to PCI mode
[ 3.820989] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.820995] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
[ 3.820998] radeon 0000:01:00.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[ 3.821002] [drm] Detected VRAM RAM=128M, BAR=128M
[ 3.821003] [drm] RAM width 64bits DDR
[ 3.821087] [TTM] Zone kernel: Available graphics memory: 432458 kiB
[ 3.821088] [TTM] Zone highmem: Available graphics memory: 1032366 kiB
[ 3.821089] [TTM] Initializing pool allocator
[ 3.821116] [drm] radeon: 128M of VRAM memory ready
[ 3.821117] [drm] radeon: 512M of GTT memory ready.
[ 3.821128] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.823677] [drm] PCI GART of 512M enabled (table at 0x0000000035400000).
[ 3.823729] radeon 0000:01:00.0: WB disabled
[ 3.823735] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0x(ptrval)
[ 3.823739] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.823739] [drm] Driver supports precise vblank timestamp query.
[ 3.823771] [drm] radeon: irq initialized.
[ 3.823774] [drm] Loading R200 Microcode
[ 3.823838] radeon 0000:01:00.0: firmware: failed to load radeon/R200_cp.bin (-2)
[ 3.823885] radeon 0000:01:00.0: Direct firmware load for radeon/R200_cp.bin failed with error -2
[ 3.824084] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware!
[ 3.824123] radeon 0000:01:00.0: failed initializing CP (-2).
[ 3.824158] radeon 0000:01:00.0: Disabling GPU acceleration
[ 3.824195] [drm] radeon: cp finalized
[ 3.825870] [drm] Radeon Display Connectors
[ 3.825872] [drm] Connector 0:
[ 3.825873] [drm] VGA-1
[ 3.825875] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.825876] [drm] Encoders:
[ 3.825877] [drm] CRT1: INTERNAL_DAC1
[ 3.825878] [drm] Connector 1:
[ 3.825878] [drm] DVI-I-1
[ 3.825879] [drm] HPD1
[ 3.825881] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.825881] [drm] Encoders:
[ 3.825882] [drm] CRT2: INTERNAL_DAC2
[ 3.825883] [drm] DFP1: INTERNAL_TMDS1
[ 3.825883] [drm] Connector 2:
[ 3.825884] [drm] SVIDEO-1
[ 3.825884] [drm] Encoders:
[ 3.825885] [drm] TV1: INTERNAL_DAC2
[ 3.864681] [drm] fb mappable at 0xE8040000
[ 3.864682] [drm] vram apper at 0xE8000000
[ 3.864683] [drm] size 3145728
[ 3.864683] [drm] fb depth is 24
[ 3.864684] [drm] pitch is 4096
[ 3.864887] fbcon: radeondrmfb (fb0) is primary device
[ 3.918364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.918367] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.918368] usb usb4: Product: OHCI PCI host controller
[ 3.918370] usb usb4: Manufacturer: Linux 4.19.0-9-686 ohci_hcd
[ 3.918371] usb usb4: SerialNumber: 0000:00:0f.2
[ 3.918722] hub 4-0:1.0: USB hub found
[ 3.918732] hub 4-0:1.0: 3 ports detected
[ 3.944266] Console: switching to colour frame buffer device 128x48
[ 3.965020] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.965090] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 3.967657] ata1.01: ATA-7: MAXTOR STM3160215A, 3.AAD, max UDMA/100
[ 3.967662] ata1.01: 312581808 sectors, multi 16: LBA48
[ 4.313315] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 4.359749] scsi 2:0:1:0: Direct-Access ATA MAXTOR STM316021 D PQ: 0 ANSI: 5
[ 4.519839] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
[ 4.519843] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 4.519845] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 4.526493] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
[ 4.547417] usb 2-1: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00
[ 4.547420] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.547422] usb 2-1: Product: USB Optical Mouse
[ 4.547424] usb 2-1: Manufacturer: Logitech
[ 4.548154] sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.548166] sd 2:0:1:0: [sda] Write Protect is off
[ 4.548168] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.548182] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.559512] hidraw: raw HID events driver © Jiri Kosina
[ 4.570345] usbcore: registered new interface driver usbhid
[ 4.570347] usbhid: USB HID core driver
[ 4.574649] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.0/0003:046D:C05A.0001/input/input3
[ 4.574870] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0f.0-1/input0
[ 4.575115] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.575118] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.575485] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.580406] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 4.580508] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.600865] sda: sda1 sda2
[ 4.601357] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.805322] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 4.962755] random: fast init done
[ 4.963263] usb 1-4: New USB device found, idVendor=2357, idProduct=011e, bcdDevice= 2.00
[ 4.963266] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.963268] usb 1-4: Product: 802.11ac WLAN Adapter
[ 4.963269] usb 1-4: Manufacturer: Realtek
[ 4.963271] usb 1-4: SerialNumber: 00e04c000001
[ 5.745336] raid6: mmxx1 gen() 1656 MB/s
[ 5.813313] raid6: mmxx2 gen() 3028 MB/s
[ 5.881322] raid6: sse1x1 gen() 1409 MB/s
[ 5.949308] raid6: sse1x2 gen() 2096 MB/s
[ 6.017325] raid6: sse2x1 gen() 2174 MB/s
[ 6.085318] raid6: sse2x1 xor() 2234 MB/s
[ 6.153322] raid6: sse2x2 gen() 2786 MB/s
[ 6.221307] raid6: sse2x2 xor() 2423 MB/s
[ 6.289356] raid6: int32x1 gen() 932 MB/s
[ 6.357305] raid6: int32x1 xor() 570 MB/s
[ 6.425359] raid6: int32x2 gen() 909 MB/s
[ 6.493340] raid6: int32x2 xor() 625 MB/s
[ 6.561306] raid6: int32x4 gen() 744 MB/s
[ 6.629307] raid6: int32x4 xor() 543 MB/s
[ 6.697355] raid6: int32x8 gen() 671 MB/s
[ 6.765327] raid6: int32x8 xor() 470 MB/s
[ 6.765328] raid6: using algorithm mmxx2 gen() 3028 MB/s
[ 6.765329] raid6: using intx1 recovery algorithm
[ 6.768125] xor: measuring software checksum speed
[ 6.805306] pIII_sse : 5724.000 MB/sec
[ 6.845305] prefetch64-sse: 6026.000 MB/sec
[ 6.845306] xor: using function: prefetch64-sse (6026.000 MB/sec)
[ 6.847486] async_tx: api initialized (async)
[ 6.892736] random: lvm: uninitialized urandom read (4 bytes read)
[ 6.984914] Btrfs loaded, crc32c=crc32c-generic
[ 19.625715] print_req_error: I/O error, dev fd0, sector 0
[ 19.625938] floppy: error 10 while reading block 0
[ 19.972549] PM: Image not found (code -22)
[ 22.314052] random: crng init done
[ 24.023165] cryptd: max_cpu_qlen set to 1000
[ 24.849424] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 27.345869] udevd[378]: starting version 3.2.7
[ 27.629214] udevd[378]: specified group 'kvm' unknown
[ 27.845057] udevd[378]: starting eudev-3.2.7
[ 28.134195] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[ 28.134207] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
[ 28.479620] parport_pc 00:02: reported by Plug and Play ACPI
[ 28.479722] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 28.567258] gameport gameport0: NS558 PnP Gameport is pnp00:03/gameport0, io 0x200, speed 873kHz
[ 28.892599] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 29.095089] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 29.133829] MCE: In-kernel MCE decoding enabled.
[ 29.656673] EDAC amd64: Node 0: DRAM ECC disabled.
[ 29.656676] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 29.737320] snd_intel8x0 0000:00:04.0: AC'97 1 does not respond - RESET
[ 29.737788] snd_intel8x0 0000:00:04.0: AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 29.738154] snd_intel8x0 0000:00:04.0: Unable to initialize codec #1
[ 29.797367] snd_intel8x0 0000:00:04.0: intel8x0_measure_ac97_clock: measured 58393 usecs (2816 samples)
[ 29.797371] snd_intel8x0 0000:00:04.0: clocking to 48000
[ 30.031559] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 30.031561] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 30.031562] powernow_k8: fid 0x2 (1000 MHz), vid 0xa
[ 30.031597] powernow_k8: Found 1 AMD Athlon™ 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 30.419957] ppdev: user-space parallel port driver
[ 32.738076] 88XXau: loading out-of-tree module taints kernel.
[ 32.745890] 88XXau: module verification failed: signature and/or required key missing - tainting kernel
[ 32.916934] usbcore: registered new interface driver rtl88xxau
[ 32.960067] rtl88xxau 1-4:1.0 wlxd037459be591: renamed from wlan0
[ 34.428757] Adding 4542544k swap on /dev/sda2. Priority:-2 extents:1 across:4542544k FS
[ 34.517282] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 35.053346] device-mapper: uevent: version 1.0.3
[ 35.054485] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 35.235229] lp0: using parport0 (interrupt-driven).
[ 36.683166] audit: type=1400 audit(1608990075.039:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1154 comm="apparmor_parser"
[ 36.690695] audit: type=1400 audit(1608990075.047:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1155 comm="apparmor_parser"
[ 36.778423] audit: type=1400 audit(1608990075.135:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1156 comm="apparmor_parser"
[ 36.778430] audit: type=1400 audit(1608990075.135:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1156 comm="apparmor_parser"
[ 36.778433] audit: type=1400 audit(1608990075.135:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1156 comm="apparmor_parser"
[ 36.844726] audit: type=1400 audit(1608990075.203:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1157 comm="apparmor_parser"
[ 36.871795] audit: type=1400 audit(1608990075.227:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1158 comm="apparmor_parser"
[ 36.930356] audit: type=1400 audit(1608990075.287:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1160 comm="apparmor_parser"
[ 36.930362] audit: type=1400 audit(1608990075.287:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1160 comm="apparmor_parser"
[ 36.930365] audit: type=1400 audit(1608990075.287:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1160 comm="apparmor_parser"
[ 38.515619] RPC: Registered named UNIX socket transport module.
[ 38.515622] RPC: Registered udp transport module.
[ 38.515623] RPC: Registered tcp transport module.
[ 38.515624] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 38.574323] FS-Cache: Loaded
[ 38.656402] FS-Cache: Netfs 'nfs' registered for caching
[ 38.742576] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 39.460930] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 43.422133] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 43.756280] Bluetooth: Core ver 2.22
[ 43.756308] NET: Registered protocol family 31
[ 43.756310] Bluetooth: HCI device and connection manager initialized
[ 43.756654] Bluetooth: HCI socket layer initialized
[ 43.756658] Bluetooth: L2CAP socket layer initialized
[ 43.756667] Bluetooth: SCO socket layer initialized
[ 44.342926] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.342931] Bluetooth: BNEP filters: protocol multicast
[ 44.342940] Bluetooth: BNEP socket layer initialized
[ 45.769779] elogind-daemon[1902]: New seat seat0.
[ 50.969535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 51.004796] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 51.037706] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 51.541160] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 51.548374] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 54.119940] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 54.210195] uli526x 0000:00:0d.0 eth0: NIC Link is Down
[ 58.236285] IPv6: ADDRCONF(NETDEV_UP): wlxd037459be591: link is not ready
[ 61.899150] NET: Registered protocol family 3
[ 62.260162] NET: Registered protocol family 5
[ 62.674094] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd037459be591: link becomes ready
[ 75.500269] elogind-daemon[1902]: New session 3 of user roma.
Allego anche uno snapshot della schermata di avvio del sistema
Ringrazio anticipatamente lo staff di Ufficio Zero lInux
Stefano